WSM KX080-3 Service
i. Fan belt
1.Fitting the oil switch
Tightening the oil switch
Fit the oil switch in position as shown at left.
PT1/8 size
7.8~9.3N.m(0.8~0.95kgf.m)5.8~6.9ft.lbs
2.Fitting the plate (clamp,2)
Fit the plate in position as shown at left.
3.Fan belt tension
Before mounting the engine, press on the arrow-
marked position in the figure to see if the tension is
proper.
(1)
(5)
(6)
(1)Water temperature switch
(to be installed at Engineering staff before shipping)
(2)Used in connecting the alternator wire harness
(3)Spring washer
Nut
(4)Plate (clamp, 2)
Plain washer
Washer-fitted machine screw
(5)Press with a force of 10 kgf to make sure the deflection
is 6-8 mm.
(6)Oil switch
III-S-23
(2)
(3)
(4)
Engine