WSM KX080-3 Service
(1)
(2)
(4)
(5)
(6)
10.Swivel frame partition
1.Applying position of the cushion
(1, delivery)
Apply the cushion to the position, shown in the
figure, on the swivel frame.
2.Applying position of the sticker
(2, delivery)
Apply the sticker to the position, shown in the
figure, on the plate (delivery) .
(1)Cushion (1, delivery)
(2)Apply the cushion in contact with the round bar.
(3)Finally, make sure this opening is covered as much
as possible with the sealing material.
(4)Plate (delivery)
(5)End face to be aligned
(6)Sticker (2, delivery)
IV-S-224
Hydraulic system
(3)