Kubota KX080-3 Workshop Manual page 534

WSM KX080-3 Service
13.Install the damping spring (336) in the casing.
Install it at the previous position before it
was disassembled.
14.Install the damping spring (337) in the casing.
Install it at the previous position before it
was disassembled.
Take care so the damping spring (337)
does not interfere with the damping spring
(336).
15.Install the piston (224).
Install it at the previous position before it
was disassembled.
16.Install the O-ring (212) ontheplug (202).
IV-S-126
Hydraulic system