When The Check-Up Is Completed; Horn Switch; Horn Switch; Light Switch - Kubota KX080-4 Operator's Manual

BWhen the Check-up is Completed
When the check-up is completed, perform the following
procedure to make the Periodic Check disappear from the
screen.
1. The message below appears onscreen to prompt the
completion of the check-up.
2. To take a look at the check points, press the
information switch.
onscreen.
3. When the check-up has been completed, press the
switch 5. If not, press the switch 1 to go back to the
previous screen.
(1) Switch 4
(2) Switch 1
(3) Switch 5
BHorn Switch

(1) Horn switch

The check points appear
CHECKS BEFORE START
BLight Switch
When the starter switch is in position "RUN", the working
light(s) and CAB light(s) will be switched on by pressing
the switch.

(1) Light switch

C Night operation
To avoid personal injury:
A When the working light and CAB light alone do
not provide sufficient
additional stationary artificial lighting and
observe safety rules for night work.
BAUX Port Flow Rate Limit Switch
It is possible to freely readjust the actuator's maximum
flow rate in the AUX operating mode.
(See "AUX PORT OPERATION" section for detail.)

(1) AUX port flow rate limit switch

17
visibility, prepare