Fitting The Washer-Fitted Elbow (68881-6446); Adaptor Tightening Torque; Tightening The Band Assembly (Fuel Tank); Fitting The Plate Assembly (Fuel) - Kubota KX080-3 Workshop Manual

WSM KX080-3 Service
(4)
(1)(2)(3)
III-S-15
5.Fitting the washer-fitted elbow (68881-6446 )
Position the elbow as shown at left.
Note: Be careful not to confuse the O ring (fuel)
setup.
(Part code of O ring)
RD809-5128
O ring (P18)

6.Adaptor tightening torque

G1/2 size
58.8~63.7N.m(6.0~6.5kgf.m)43.4~47.0ft.lbs

7.Tightening the band assembly (fuel tank)

Shake the tank by hand and make sure it does
not wobble.

8.Fitting the plate assembly (fuel)

Tighten the assembly while holding the tank in
position.
Tightening torque
48.1~55.9N.m(4.9~5.7kgf.m)35.5~41.2ft.lbs
(1)Band assembly (fuel tank)
(2)Plain washer
(3)Nut
(4)Plate assembly (fuel)
Engine