Kubota KX080-3 Workshop Manual page 561

WSM KX080-3 Service
2)Remove spur gears [7] from each crankshaft
[9].
(7) Remove the rear flange
1)Invert the travel motor.
Note : The following task is carried out to
facilitate
disassembling the rear flange [201]
inside. Plugs must be loosened to the
degree where they can be removed
by hand. If not disassembling the rear
flange [201] inside, do not loosen the
plugs.
2)Loosen the plugs [282] (2 plugs).
3)Loosen the plugs [289] (2 plugs).
4)Loosen the plugs [224] (2 plugs).
5)Loosen the plugs [282] (2 plugs)
6)Remove the hexagon socket bolts [245] (6
bolts).
IV-S-153
Hydraulic system
plug removal if