WSM KX080-3 Service
(1)
(3)
(4)
(5)
(8)
(2)
'? ?@
ˆÓ
Šë Œ¯
?A "M ‚¢ ‚ ‚ ¯ ‚é ‚È ?B
- 4 9 0 - T O Y O R A D I A T O R
W h e n , h o t D A N G E R , n e v e r o p e n C A U T I O N
(6)
(7)
(9)
(10)
(11)
3.Routes of the fuel feed and return hoses
P A 6 6 - G F 3 0
(12)
(14)
(13)
(16)
(17)
(1)
(2)Filter assembly (fuel)
(3)Fuel return hose
(4)Pass the fuel return hose below the fuel feed hose and
the engine's injection pipe.
Then connect it to the engine.
(5)(Engine)
(6)Pump assembly (fuel)
(7)Pass the fuel return hose outside of the pump assembly
(fuel) (RD411-5135 ), as shown in the figure.
Note: Lay the fuel return hose out of contact with the
pump.
(8)(Partition board)
(9)Pass through this notch of the partition board (RD809-
4153 ).
(10)Fuel return hose
(11)Fuel feed hose
(12)Filter assembly (separator)
(13)Fuel return hose
(14)Fuel feed hose
(15)Lay the fuel return hose out of contact with the sensor
(fuel) connector.
(16)Pass through the oval hole of the swivel frame.
(17)(Battery mount of the swivel frame)
III-S-18
Engine
(15)