WSM KX080-3 Service
(1)
(2)
(3)
6.When reassembling
1) Applying grease to the spline
Apply a proper amount of grease.
(Be careful not to allow it overflow.)
Be careful to keep the rubber free of grease.
Wipe off grease, if on the rubber, immediately.
2) Fitting sequence of the coupling
(A): Tighten up first.
*Set the coupling to the spring pin (a) and
tighten up.
(B): Tighten up second.
*Set the coupling to the spring pin (b) and
tighten up.
Tightening torque
210~230N.m(21.4~23.5kgf.m)154.9~169.6ft.lbs
* Do not apply screw adhesive.
(1)Housing (pump)
(2)Coupling
(3)Apply grease to the spline.
(4)Parallel pin
III-S-6
Engine
A