Clearance Of Cover; Level Difference Between Corners; Dimensional Difference At Clearances - Kubota KX080-3 Workshop Manual

WSM KX080-3 Service
(1)
(2)
(3)
(4)
(5)
(7)
(6)
l. Clearances of cover
1.Clearance between cover (left) and weight (870)
Clearance A shown at left
8~12mm(0.31~0.47inch)
2.Clearance between hood (back) and each side
Clearance B shown at left
16~20mm(0.63~0.79inch)
3.Clearance between hood (back) and weight
Clearance C shown at left
8~12mm(0.31~0.47inch)
4.Clearance between cover (front) and cover (right)
Clearance D shown at left
10~14mm(0.39~0.55inch)
5.Clearance between cover (front) and cover (tank)
Clearance E shown at left
8~12mm(0.31~0.47inch)
6.Clearance between cover (right) and cover (tank)
Clearance F shown at left
10~14mm(0.39~0.55inch)
7.Clearance between cover (right) and weight (870)
Clearance G shown at left
4~8mm(0.16~0.31inch)
8.Clearance between cover (arch, left) and weight (870)
Clearance H shown at left
5~9mm(0.20~0.35inch)

9.Level difference between corners

Clearance I shown at left
6~10mm(0.24~0.39inch)

10.Dimensional difference at clearances

Less than 3 mm
(0.12inch) 2mm(0.08inch)
(1)Cover (left)
(2)Cover (arch, left)
(3)Cover (front)
(4)Cover (tank)
(5)Cover (right)
(6)Cover (back)
(7)(Same on the other side)
(8)Weight (870)
II-S-50
Machine body