Water Pump; Oil Cooler Removal - Kubota KX080-3 Workshop Manual

WSM KX080-3 Service
(6) Water Pump and Oil Cooler

Water Pump

1. Remove the pipe band and the water pipe (1).
2. Remove the water pump (2).
(When reassembling)
• When mounting the water pump, take care not to forget
mounting the O-ring and not to let it out of position.
(1) Water Pipe
Oil Cooler
1. Remove the water pipe (1).
2. Remove the oil filter cartridge (2) and the oil cooler joint screw
(3).
3. Remove the oil cooler (4).
Tightening torque Oil cooler joint screw
(1) Water Pipe
(2) Oil Filter Cartridge
III-S-133
(2) Water Pump
W1187742
39.2 to 44.1 N·m
4.0 to 4.5 kgf·m
28.9 to 32.5 ft-lbs
(3) Oil Cooler Joint Screw
(4) Oil Cooler
W1032266
Engine