WSM KX080-3 Service
4)Place a thickness gauge between the ring
[20] and tapered roller bearing [22] and
measure the clearance.
5)Ring [20] thickness measurement
Set thickness (MAX.) of the ring
MAX. = Thickness of thickness gauge +
Thickness of Currently mounted ring
Set thickness (MIN.) of the ring
MAX. = Thickness of thickness gauge +
Thickness of Currently mounted ring
- 0.002 Inch (0.05 mm)
6) After deciding thickness of the ring, select
from among the 15 types and mount on the
hold flange.
(See 6. CLEARANCE ADJUSTMENT PART
DIMENSIONS TABLE.)
7) After mounting the ring of the set thickness,
proceed to (6).
IV-S-192
Hydraulic system