Arp-Reply-Bc-Dmac - Centrecom FS980M/9 Command Reference Manual

IP A P
DDRESSING AND ROTOCOL
- - -
ARP REPLY BC DMAC

arp-reply-bc-dmac

Overview Use this command to allow processing of ARP replies that arrive with a broadcast
destination MAC (ffff.ffff.ffff). This makes neighbors reachable if they send ARP
responses that contain a broadcast destination MAC.
Use the no variant of this command to turn off processing of ARP replies that arrive
with a broadcast destination MAC.
arp-reply-bc-dmac
Syntax
no arp-reply-bc-dmac
Default By default, this functionality is disabled.
Mode Interface Configuration for VLAN interfaces
Example To allow processing of ARP replies that arrive on VLAN2 with a broadcast
destination MAC, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related clear arp-cache
Commands
show arp
613-50137-01 Rev A
C
OMMANDS
configure terminal
interface vlan2
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
arp-reply-bc-dmac
575