802.1X Commands; Introduction; Chapter 26: 802.1X Commands - Allied Telesis AT-x210-9GT Command Reference Manual

26

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
802.1X port access control. For more information, see the
Authentication Feature Overview and Configuration Guide
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50105-01 REV C

802.1X Commands

"debug dot1x" on page 796
"dot1x control-direction" on page 797
"dot1x eap" on page 799
"dot1x eapol-version" on page 800
"dot1x initialize interface" on page 802
"dot1x initialize supplicant" on page 803
"dot1x keytransmit" on page 804
"dot1x max-auth-fail" on page 805
"dot1x max-reauth-req" on page 807
"dot1x port-control" on page 809
"dot1x timeout tx-period" on page 811
"show debugging dot1x" on page 813
"show dot1x" on page 814
"show dot1x diagnostics" on page 817
"show dot1x interface" on page 819
"show dot1x sessionstatistics" on page 824
"show dot1x statistics
"show dot1x supplicant" on page 826
"show dot1x supplicant
Command Reference for x210 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
interface" on page 825
interface" on page 828
AAA and Port
794