Qppb Configuration Task List; Configuring The Route Sender; Configuring Basic Bgp Functions; Creating A Routing Policy - HP FlexNetwork MSR Series Configuration Manuals

QPPB configuration task list

Tasks at a glance
Configuring the route
•
(Required.)
•
(Optional.)
Configuring the route
•
(Required.)
•
(Required.)
•
(Required.)
•
(Required.)
•
(Required.)

Configuring the route sender

Configure the BGP route sender to set route attributes for routes before advertising them.

Configuring basic BGP functions

For more information, see Layer 3—IP Routing Configuration Guide.

Creating a routing policy

Configure a routing policy to classify routes and set route attributes for the route classes. For more
information, see Layer 3—IP Routing Configuration Guide.

Configuring the route receiver

Configure the BGP route receiver to match the route attributes set by the router sender and set the
QPPB-related attributes.
Configuring basic BGP functions
For more information, see Layer 3—IP Routing Configuration Guide.

Configuring a routing policy

Configure a routing policy to perform the following operations:
•
Match the route attributes set by the route sender.
•
Set the IP precedence, local QoS ID, or both for the matching routes.
For more information, see Layer 3—IP Routing Configuration Guide.
sender:
Configuring basic BGP functions
Creating a routing policy
receiver:
Configuring basic BGP functions
Configuring a routing policy
Enabling QPPB on the route receiving interface
Configuring a QoS policy
Applying the QoS policy to an interface
97