Ethernet Configuration Commands; Interface Ethernet; Interface Range Ethernet - Dell PowerConnect 5316M Reference Manual

Ethernet Configuration Commands

NOTE:
Some of the commands included in this group may have implications on internal ports.

interface ethernet

The interface ethernet Global Configuration mode command enters the interface configuration
mode to configure an Ethernet type interface.
Syntax
interface ethernet interface
• interface — Valid Ethernet port (Range: g1 - g16).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables ports g16 for configuration.
console(config)# interface ethernet g16

interface range ethernet

The interface range ethernet Global Configuration mode command enters the interface
configuration mode to configure multiple Ethernet type interfaces.
Syntax
interface range ethernet {port-range | all}
• port-range — List of valid ports to add. Where more than one port is listed, separate non-
consecutive ports with a comma and no spaces, use a hyphen to designate a range of ports
and group a list seperated by commas in brackets, for example g(1,2,4-6).
• all — All Ethernet ports.
Default Configuration
This command has no default configuration.

Ethernet Configuration Commands

8
99