Ethernet Configuration - Dell Networking 7048 Reference Manual

Command
show mail-server
a. For the meaning of each Mode abbreviation, see

Ethernet Configuration

Command
clear counters
description
duplex
flowcontrol
interface
interface range
show interfaces advertise
show interfaces
configuration
show interfaces counters
show interfaces description
show interfaces detail
show interfaces status
show statistics
show statistics switchport
show storm-control
Description
Displays the configuration of all the mail servers
or a particular mail server.
Mode Types
Description
Clears statistics on an interface.
Adds a description to an interface.
Configures the full/half duplex operation of a
given Ethernet interface when not using auto-
negotiation.
Configures the flow control on a given interface. GC
Enters the interface configuration mode to
configure parameters for an interface.
Enters the interface configuration mode to
execute a command on multiple ports at the
same time.
Displays information about auto negotiation
advertisement.
Displays the configuration for all configured
interfaces.
Displays traffic seen by the physical interface.
Displays the description for all configured
interfaces.
Displays the detail for all configured interfaces. UE
Displays the status for all configured interfaces. UE
Displays statistics for one port or for the entire
switch.
Displays detailed statistics for a specific port or
for the entire switch.
Displays the storm control configuration.
on page 81.
Command Groups
a
Mode
PE
a
Mode
PE
IC
IC
GC or
IC
GC,
IC, IR
PE
UE
UE
UE
PE
PE
PE
92