NEC UNIVERGE SV8100 Features & Specifications Manual page 1094

Issue 5.0
MSG Key will Operate as Voice Mail Key
The system enhances a telephone MSG key function when connected to a system which has voice mail
installed. When an extension receives a voice mail, the MSG key can be used to check the number of
messages in voice mail, as well as call the voice mail to listen to the messages.
Analog Voice Mail Protocol Leading and Trailing Digits Assignment
The Analog Voice Mail Protocol Leading Digits (chassis to VM) and the Trailing Digits format can be
changed.
The following chart illustrates the input data for PRG 45-04-01~PRG 45-04-09 (Voice Mail Digit Add
Assignment) based on the setting in Program 45-01-15 (Analog Voice Mail Protocol Selection) and
Program 45-01-17 (Reply Mailbox Number). If PRG 45-01-15 is set to Fixed (0) it uses the Fixed
Memory Location for the Leading Digits or, if set to Program (1) it uses PRG 45-04-01~PRG 45-04-09 for
the Leading Digits. If Program 45-01-17 is set to 0 (No), it does not have the calling party in the Trailing
Digits.
.
The default values for Program 45-04-01~Program 45-04-09 are not assigned.
Use the chart below to determine what leading and trailing digits will be sent to the Analog Voice Mail
System.
Program
45-04-01 - Remote Logon
(Internal)
*
Up to four digits
Default not assigned
45-04-02 - Direct Logon
*
Up to four digits
Default not assigned
45-04-03 - Transfer
Message
*
Up to four digits
Default not assigned
45-04-04 - Forward-All
*
Up to four digits
Default not assigned
1 - 1084
Program 45-01-15 Program 45-01-15
(0 = Fixed) (1 = Program)
Program 45-01-17 Program 45-01-17
(1=Yes or 0=No) (1=Yes)
***
1XXX Up to four digits +
#
XXX Up to four digits +
***
2YYY Up to four digits +
***
2XXXYYY
Up to four digits +
XXXYYY
***
3UUUZZZ Up to four digits +
UUUZZZ
Program 45-01-15
(1=Program)
Program 45-01-17
(0=No)
Up to four digits +
XXX XXX
Up to four digits +
XXX XXX
Up to four digits +
YYY YYY
Or
Up to four digits +
ZZZ
UNIVERGE SV8100
Description
Remote Log-On (Internal)
Internal call to VM from extension
XXX.
User has not indicated intent to
enter mail box.
Direct Log-On
Connect user to mail box for
extension XXX.
Transfer Message
User is transferring a call to VM
Record a message to be placed in
mail box of extension YYY.
Record Message for Called Extension
(QVM)
Record a message to be placed in
mail box of extension YYY.
Store source extension number
XXX for automatic reply feature
Forward-All
Extension or Trunk UUU that
called extension ZZZ and was
forwarded to the Voice Mail Box of
extension ZZZ.
Voice Mail Integration (Analog)