Figure 4.16 Qos Ingress Queue Policer Configuration; Figure 4.17 Qos Egress Port Schedulers - Advantech EKI-8500 Series User Manual

The QoS Ingress Queue Policer Configuration page displays.

Figure 4.16 QoS Ingress Queue Policer Configuration

The following table describes the items in the previous figure.
Item
Port
Enable (E)
Rate
Unit
Save
Reset
4.3.4.4 Port Scheduler
This function provides an overview of QoS Egress Port Schedulers for all switch
ports.
1. Navigate to Configuration > QoS and click Port Scheduler.
The QoS Egress Port Schedulers page displays.
Description
The port number for which the configuration below applies.
Enable or disable the port policer for this switch port. If enabled, rate
and unit options display.
Enter the string to indicate the rate for the queue policer (values: 10 to
13128147 for kbps, 1 to 13128 Mbps/fps/kfps).
The field displays if one of the queue policers is enabled.
Click the drop-down menu to indicate the rate unit of measurement
(options: kbps or Mbps).
The field displays if one of the queue policers is enabled.
Click Save to create a new user account.
Click Reset to clear the settings.

Figure 4.17 QoS Egress Port Schedulers

46 EKI-8500 Series User Manual