From the FUP editor main menu click on Symbols then select the symbol library
Individual AP then SIM/ET200M. Follow the steps below to select and place the
BT block on your diagram:
.
1. Scroll through the menu with the right and left mouse buttons to obtain the desired symbol
1
2. When you have found the correct symbol, choose the symbol by holding down the middle
mouse button and drag it on to the page. Release the middle mouse button when you are at your
desired location on the page
2
2
Training Center
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.