Setting The Multi-Channel View - Siemens SINUMERIK 840D sl Operating Manual

Displaying/hiding a multi-channel view
...
6.3

Setting the multi-channel view

Setting
View
Channel selection and
sequence
(for "2 channels" view)
Visible
(for "2 channels" view)
Universal
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
1. Select the "Machine" operating area
2. Select the operating mode "JOG", "MDA" or "AUTO".
3. Press the menu forward key and the "Settings" softkey.
4. Press the "Multi-channel view" softkey.
5. In the window "Settings for multi-channel view" in the selection
box "View", select the entry "2 channels" and define the
channels as well as the sequence in which they are displayed.
In the basic screen for the "AUTO", "MDA" and JOG" operating
modes, the upper window of the lefthand and righthand channel
columns are occupied by the actual value window.
6. Press the "T,S,F" softkey if you wish to view the "T,F,S"
window.
The "T,F,S" window is displayed in the lower window of the
lefthand and righthand channel column.
Meaning
Here, you define whether one or two channels are displayed.
1 channel
•
2 channels
•
Here, you create the channel group, i.e. you specify which channels and
in which sequence are displayed in the multi-channel view.
Here, you specify which channels are displayed in the two-channel view.
Multi-channel view
6.3 Setting the multi-channel view
145