Data Fields; Guide To Feature Programming - NEC UNIVERGE SV9100 Programming Manual

ISSUE 2.0
Use the following procedure to download an RTP log file to USB using TEL Pro.
1.
2.
3.
4.
S 3 D
ECTION ATA
G
UIDE TO
Start Date
End Date
Ext/TRK Number
Ext/TRK Number (Call Partner)
Cumulative Cnt
Max Fraction Lost
Average Fraction Lost
Number of Sent RTP packets
Number of Received RTP packets
Cumulative Cnt (Remote)
Max Fraction Lost (Remote)
Max Round Trip Time (Remote)
Number of Sent RTP packets (remote)
Sent Sender Report Ntp Timestamp
SV9100 PC Programming Manual
Insert USB Drive into GCD-CP10.
Enter Telephone Programming and go to PRG 90-03-03.
Enter 1 and Transfer.
The log is finished saving after "Saving RTP log" is cleared from display.
F
IELDS
F P
EATURE ROGRAMMING
Table L-1 Data Fields
Data Name
Sender Statistical Information on System Side
Data Outline
The date when the call has started
The date when the call has ended
Receiving RTP packet loss total
When the max packet loss rate and the average
packet loss rate are the same value, the pocket
loss is occurring constantly. When the max
packet loss rate is high compared with the
average packet loss, it is regarded as a
temporary packet loss.
When exceeding 1%, reconsideration of the
network environment is needed.
Number of Sent RTP packets
Number of Received RTP packets
Receiving RTP packet loss total of Remote side
(IP Terminal, IP Trunk, etc.).
The max packet loss rate of the remote side.
The maximum round trip time of a packet.
The number of Sent RTP packets (remote)
Sent Sender Report Ntp Timestamp
L-3