Baud Rate Selection (Rs-232) - Keysight 34420A User Manual

Baud Rate Selection (RS-232)

You can select one of six baud rates for RS-232 operation. The rate is set to 9600
baud when the meter is shipped from the factory.
– Select one of the following: 300, 600, 1200, 2400, 4800, or 9600 baud (factory
– The baud rate selection is stored in non-volatile memory, and does not change
– Front Panel operation: set the baud rate under the 3: BAUD RATE command in
– Remote operation: use the following commands to set the baud rate:
If you change the baud rate over the remote interface, you may lose control of the
meter.
Keysight 34420A User's Guide
setting).
when power has been off or after a remote interface reset.
the I/O menu.
See also "To Set the Baud Rate"
SYStem:COMMunicate:SERial:BAUD <baud>
Features and Functions
on page 209.
3
117