Hitachi SH7750 Programming Manual page 20

High-performance risc engine superh (sh) 32-bit risc mcu/mpu series
Hide thumbs Also See for SH7750:
Table of Contents

Advertisement

Table 1.1
SH7750 Features (cont)
Item
Bus state
controller (BSC)
Direct memory
access controller
(DMAC)
Timer unit (TMU)
Realtime clock
(RTC)
Rev. 2.0, 03/99, page 6 of 396
Features
Supports external memory access
 64/32/16/8-bit external data bus
External memory space divided into seven areas, each of up to 64
Mbytes, with the following parameters settable for each area:
 Bus size (8, 16, 32, or 64 bits)
 Number of wait cycles (hardware wait function also supported)
 Direct connection of DRAM, synchronous DRAM, and burst ROM
possible by setting space type
 Supports fast page mode and DRAM EDO
 Supports PCMCIA interface
 Chip select signals (
DRAM/synchronous DRAM refresh functions
 Programmable refresh interval
 Supports CAS-before-RAS refresh mode and self-refresh mode
DRAM/synchronous DRAM burst access function
Big endian or little endian mode can be set
4-channel physical address DMA controller
Transfer data size: 8, 16, 32, or 64 bits, or 32 bytes
Address modes:
 1-bus-cycle single address mode
 2-bus-cycle dual address mode
Transfer requests: External, on-chip module, or auto-requests
Bus modes: Cycle-steal or burst mode
Supports on-demand data transfer
3-channel auto-reload 32-bit timer
Input capture function
Choice of seven counter input clocks
On-chip clock and calendar functions
Built-in 32 kHz crystal oscillator with maximum 1/256 second resolution
(cycle interrupts)
to
) output for relevant areas

Advertisement

Table of Contents
loading

Table of Contents