Table of Contents
Advertisement
Section 3 Memory Management Unit (MMU)
3.1
Overview
3.1.1
Features
The SH7750 can handle 29-bit external memory space from an 8-bit address space identifier and
32-bit logical (virtual) address space. Address translation from virtual address to physical address
is performed using the memory management unit (MMU) built into the SH7750. The MMU
performs high-speed address translation by caching user-created address translation table
information in an address translation buffer (translation lookaside buffer: TLB). The SH7750 has
four instruction TLB (ITLB) entries and 64 unified TLB (UTLB) entries. UTLB copies are stored
in the ITLB by hardware. A paging system is used for address translation, with support for four
page sizes (1, 4, and 64 kbytes, and 1 Mbyte). It is possible to set the virtual address space access
right and implement storage protection independently for privileged mode and user mode.
3.1.2
Role of the MMU
The MMU was conceived as a means of making efficient use of physical memory. As shown in
figure 3.1, when a process is smaller in size than the physical memory, the entire process can be
mapped onto physical memory, but if the process increases in size to the point where it does not fit
into physical memory, it becomes necessary to divide the process into smaller parts, and map the
parts requiring execution onto physical memory on an ad hoc basis ((1)). Having this mapping
onto physical memory executed consciously by the process itself imposes a heavy burden on the
process. The virtual memory system was devised as a means of handling all physical memory
mapping to reduce this burden ((2)). With a virtual memory system, the size of the available
virtual memory is much larger than the actual physical memory, and processes are mapped onto
this virtual memory. Thus processes only have to consider their operation in virtual memory, and
mapping from virtual memory to physical memory is handled by the MMU. The MMU is
normally managed by the OS, and physical memory switching is carried out so as to enable the
virtual memory required by a task to be mapped smoothly onto physical memory. Physical
memory switching is performed via secondary storage, etc.
The virtual memory system that came into being in this way works to best effect in a time sharing
system (TSS) that allows a number of processes to run simultaneously ((3)). Running a number of
processes in a TSS did not increase efficiency since each process had to take account of physical
memory mapping. Efficiency is improved and the load on each process reduced by the use of a
virtual memory system ((4)). In this system, virtual memory is allocated to each process. The task
of the MMU is to map a number of virtual memory areas onto physical memory in an efficient
manner. It is also provided with memory protection functions to prevent a process from
inadvertently accessing another process's physical memory.
Rev. 2.0, 03/99, page 25 of 396
Advertisement
Table of Contents
