Configuration Procedure On The Intermediate Switch; Configuration Procedure On The Destination Switch - Huawei Quidway S3100 Series Operation Manual

Operation Manual – QoS
Quidway S3100 Series Ethernet Switches
Operation
Configure
remote-probe
VLAN
remote
mirroring group
Display the remote
source
group settings

1.9.3 Configuration Procedure on the Intermediate Switch

Table 1-18 Configuration procedure on the intermediate switch
Operation
Enter system view
Create
Remote-probe
VLAN and enter
the VLAN view
Exit the
view
Enter Ethernet port
view of the Trunk
port
Configure to permit
Remote-probe
VLAN packets to
pass through the
Trunk port

1.9.4 Configuration Procedure on the Destination Switch

Table 1-19 Configuration procedure on the destination switch
Operation
Enter system view
Create
Remote-probe
VLAN and enter
the VLAN view
Command
the
mirroring-group
for the remote-probe
source remote-probe-vlan-id
display
mirroring
remote-source
Command
system-view
vlan vlan-id
current
quit
interface
interface-number
port trunk permit
remote-probe-vlan-id
Command
system-view
the
vlan vlan-id
Huawei Technologies Proprietary
group-id
vlan Required
mirroring-group
Can be executed in any view.
—
The
represents
Remote-probe VLAN.
—
interface-type
—
Required
This setting is needed for
vlan
intermediate
connected
source switch and destination
switches.
—
The
represents
Remote-probe VLAN.
1-17
Chapter 1 QoS Configuration
Description
Description
parameter vlan-id
the ID
switch ports
with both
Description
parameter vlan-id
the ID
of
the
of