Huawei Quidway S3100 Series Operation Manual page 62

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
Operation
Configure
command
available to users
logging
user interface
Configure
protocol
supported by the
user interface
Make
services available
Set the maximum
number of lines the
screen can contain
Set the
command
size
Set the
time of the user
interface
Note that if you configure to authenticate the users in the password mode, the
command level available to users logging into a switch depends on both the
authentication-mode { password | scheme | none } command and the user
privilege level level command, as listed in Table 3-7.
Command
the
level
user privilege level level
into the
the
to be protocol inbound { all | ssh
| telnet }
terminal
shell
screen-length
screen-length
history
history-command
buffer
max-size value
timeout
idle-timeout
[ seconds ]
Huawei Technologies Proprietary
Chapter 3 Logging in through Telnet
Optional
By default, commands of level
0 are available to users
logging
interface.
Optional
By
protocol and SSH protocol are
supported.
Optional
By default, terminal services
are available in all user
interfaces.
Optional
By default, the screen can
contain up to 24 lines.
You
screen-length 0 command to
disable the function to display
information in pages.
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.
Optional
The default timeout time of a
user interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a
minutes
user interface is terminated if
no operation is performed in
the user interface within 10
minutes.
You can use the idle-timeout
0 command to disable the
timeout function.
3-7
Description
into VTY user
default, both Telnet
can use the