Huawei Quidway S3100 Series Operation Manual page 89

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
Operation
Apply
while
the
community name
Apply
while
the SNMP group
name
Apply
while
the SNMP
name
Note:
You can specify different ACLs while configuring the SNMP community name, the
SNMP group name and the SNMP user name.
As SNMP community name is a feature of SNMP V1 and SNMP V2, the specified ACLs
in the command that configures SNMP community names (the snmp-agent
community command) take effect in the network management systems that adopt
SNMP V1 or SNMP V2.
Similarly, as SNMP group name and SNMP user name are features of SNMP V2 and
the higher SNMP versions, the specified ACLs in the commands that configure SNMP
group names (the snmp-agent group command and the snmp-agent group v3
command) and SNMP user names (the snmp-agent usm-user command and the
snmp-agent usm-user v3 command) take effect in the network management systems
that adopt SNMP V2 or higher SNMP versions. If you configure both the SNMP group
name and the SNMP user name and specify ACLs in the two operations, the switch will
filter network management users by both SNMP group name and SNMP user name.
the ACL snmp-agent community { read
configuring | write
SNMP [ [ mib-view view-name ] | [ acl
acl-number ] ]*
snmp-agent group { v1 | v2c }
group-name
read-view
write-view
the ACL
notify-view ] [ acl acl-number ]
configuring
snmp-agent
group-name [ authentication |
privacy ] [ read-view read-view ]
[ write-view
[ notify-view notify-view ] [ acl
acl-number ]
snmp-agent usm-user { v1 |
v2c } user-name group-name
[ acl acl-number ]
the ACL
snmp-agent
configuring
user-name
user
[ authentication-mode { md5 |
sha }
[ privacy-mode
priv-password ] [ acl acl-number ]
Huawei Technologies Proprietary
Chapter 7 Controlling Login Users
Command
} community-name
[ read-view
] [ write-view
] [ notify-view
group v3
write-view ]
usm-user v3
group-name
auth-password ]
des56
7-5
Description
Optional
Optional
Optional