Displaying Information About Igmp Snooping; Igmp Snooping Configuration Example; Example 1 - Huawei Quidway S3100 Series Operation Manual

Operation Manual – IGMP Snooping
Quidway S3100 Series Ethernet Switches
Note:
You cannot set the isolate VLAN as a multicast VLAN.
One port can belong to only one multicast VLAN.
The port connected to a user end can only be as set as a hybrid port.

1.3 Displaying Information About IGMP Snooping

You can execute the following display commands in any view to display information
about IGMP Snooping.
Table 1-10 Display information about IGMP Snooping
Operation
Display
IGMP
configuration
Display
Snooping
statistics
Display IP and MAC
multicast groups in one
or all VLANs
Clear IGMP Snooping
statistics

1.4 IGMP Snooping Configuration Example

1.4.1 Example 1

Configure IGMP Snooping on a switch.
I. Network requirements
Connect the router port on the switch to the router, and other non-router ports which
belong to VLAN 10 to user PCs. Enable IGMP Snooping on the switch.
the current
display
Snooping
configuration
IGMP
display
message
statistics
display igmp-snooping group
[ vlan vlanid ]
reset
statistics
Huawei Technologies Proprietary
Chapter 1 IGMP Snooping Configuration
Command
igmp-snooping
igmp-snooping
igmp-snooping
1-10
Description
You can execute the
display commands in
any view.
You can execute the
reset command in
user view.