Configuration Example - Huawei Quidway S3100 Series Operation Manual

Operation Manual – MSTP
Quidway S3100 Series Ethernet Switches
I. Performing the mCheck operation in system view
Table 1-27 Perform the mCheck operation in system view
Operation
Enter system view
Perform
mCheck operation
II. Performing the mCheck operation in Ethernet port view
Table 1-28 Perform the mCheck operation in Ethernet port view
Operation
Enter system view
Enter Ethernet port
view
Perform
mCheck operation
Caution:
The stp mcheck command takes effect only when the switch operate in MSTP mode,
and does not take effect when the switch operates in STP/RSTP mode.)

1.4.3 Configuration Example

# Perform the mCheck operation on Ethernet1/0/1 port (assuming that the switch
operates in MSTP mode and the port operates in the STP/RSTP mode).
Configure in system view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] stp interface ethernet1/0/1 mcheck
Configure in Ethernet port view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet1/0/1
[Quidway-Ethernet1/0/1] stp mcheck
Command
system-view
the stp [ interface interface-list ]
mcheck
Command
system-view
interface interface-type
interface-number
the
stp mcheck
Huawei Technologies Proprietary
1-31
Chapter 1 MSTP Configuration
Description
—
Required
Description
—
—
Required