Enabling Information Output To A Monitor Terminal - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Information Center
Quidway S3100 Series Ethernet Switches
Operation
Enable
terminal display
Enable log terminal
display
Enable
terminal display

1.2.4 Enabling Information Output to a Monitor Terminal

Table 1-8 lists the related configurations on the switch.
Table 1-8 Enable information output to a monitor terminal
Operation
Enter system view
Enable
information center
Enable information
output to Telnet
terminal or dumb
terminal
Define
information source
Set the format of
time stamp
Command
debug
terminal debugging
terminal logging
trap
terminal trapping
Command
system-view
the
info-center enable
info-center
channel { channel-number |
channel-name }
info-center
{ modu-name | default }
an channel { channel-number |
channel-name } [ { log | trap
| debug } * { level severity |
state state } * ]
info-center
{ log | trap | debugging }
{ boot | date | none }
Huawei Technologies Proprietary
1-8
Chapter 1 Information Center
Optional
By default, debug terminal
display is disabled for terminal
users.
Optional
By default,
display is enabled for console
users.
Optional
By default,
display is enabled for terminal
users.
—
Optional
By default, the information
center is enabled.
Required
monitor
By default, the switch outputs
log information
terminal.
source
Required
Optional
This is to set the time stamp
timestamp
format
information output.
This determines how the time
stamp is presented to users.
Description
log terminal
trap terminal
Description
to user
for log/debug/trap