Http Connection Establishment - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
Chapter 5 Logging in through Web-based Network
5.1 Introduction
An S3100 series switch has a Web server built in. You can log into an S3100 series
switch through a Web browser and manage and maintain the switch intuitively by
interacting with the built-in Web server.
To log into an S3100 series switch through the built-in Web-based network
management system, you need to perform the related configuration on both the switch
and the PC operating as the network management terminal.
Table 5-1 Requirements for logging into a switch through the Web-based network
management system
Switch
PC operating as the
network management
terminal

5.2 HTTP Connection Establishment

Step 1: Log into the switch through the Console port and assign an IP address to the
management VLAN interface of the switch.
Connect to the Console port. To log into a switch through the Console port, you
need to connect the serial port of your PC (or terminal) to the Console port of the
switch using a configuration cable, as shown in the following figure.
Management System
Item
The management VLAN of the switch is configured. The
route between the switch and the network management
terminal is available. (Refer to the Management VLAN
Configuration module for more.)
The user name and password for logging into the
Web-based network management system are configured.
IE is available.
The IP address of the management VLAN interface of the
switch is available.
Huawei Technologies Proprietary
Chapter 5 Logging in through Web-based Network
Requirement
5-1
Management System