Tftp Configuration; Configuration Example - Huawei Quidway S3100 Series Operation Manual

Operation Manual – FTP and TFTP
Quidway S3100 Series Ethernet Switches
Device
PC

1.2.2 TFTP Configuration

I. Prerequisites
A switch operates as a TFTP client. A PC operates as the TFTP server. The network
operates properly, as shown in Figure 1-4.
II. Configuration procedure
Table 1-7 Configure TFTP
Operation
Set the TFTP file
transmission mode
Download a file
Upload a file
Enter system view
Specify the ACL
adopted when a
switch attempts to
connect a TFTP
server

1.2.3 Configuration Example

I. Network requirements
A switch and a PC operate as a TFTP client and the TFTP server.
The TFTP work directory is configured on the TFTP server.
The IP address of a VLAN interface on the switch is 1.1.1.1. The port through
which the switch connects with the PC belongs to the VLAN. The IP address of the
PC is 1.1.1.2.
Configuration
The TFTP server is started
and the TFTP work directory
is configured.
Command
tftp { ascii | binary }
tftp tftp-server
source-file [ dest-file ]
tftp tftp-server
source-file [ dest-file ]
system-view
tftp-server acl acl-number
Huawei Technologies Proprietary
Chapter 1 FTP and TFTP Configuration
Default
—
Optional
By default, the binary file
transmission
adopted.
get
Optional
put
Optional
—
Optional
1-11
Description
—
Description
mode is