Aaa&Radius Configuration Example; Remote Radius Authentication Of Telnet/Ssh Users - Huawei Quidway S3100 Series Operation Manual

Operation Manual – AAA&RADIUS
Quidway S3100 Series Ethernet Switches
Display the information about
specified or all local users
Table 1-24 Display RADIUS protocol information
Display the statistics about local
RADIUS authentication server
Display
information about one specific or
all RADIUS schemes
Display
RADIUS packets
Display the buffered no-response
stop-accounting request packets
Delete the buffered no-response
stop-accounting request packets
Clear the statistics about the
RADIUS protocol
1.7 AAA&RADIUS Configuration Example

1.7.1 Remote RADIUS Authentication of Telnet/SSH Users

Note:
The configuration procedure for the remote authentication of SSH users through
RADIUS server is similar to that of Telnet users. The following description only takes
the remote authentication of Telnet users as example.
Operation
Operation
the configuration
the statistics about
Huawei Technologies Proprietary
Chapter 1 AAA&RADIUS Configuration
Command
display local-user [ domain isp-name |
idle-cut { disable | enable } | vlan vlan-id |
service-type { ftp | lan-access | ssh | telnet |
terminal } | state { active | block } |
user-name user-name ]
Command
display local-server statistics
display radius [ radius-scheme-name ]
display radius statistics
display
{ radius-scheme
session-id session-id | time-range start-time
stop-time | user-name user-name }
reset
{ radius-scheme
session-id session-id | time-range start-time
stop-time | user-name user-name }
reset radius statistics
1-30
stop-accounting-buffer
radius-server-name
stop-accounting-buffer
radius-server-name
|
|