Configuring Port Priority - Huawei Quidway S3100 Series Operation Manual

Operation Manual – QoS
Quidway S3100 Series Ethernet Switches
QoS
Local
monitoring
RSPAN
Port
limit
Unknown
multicast
packet
discarding

1.3 Configuring Port Priority

By default, the switch replaces 802.1p priority brought by received packets with the port
priority, thus controls packet QoS.
Specifications
One-to-multiple
monitoring, that is to
say, one monitoring
port to multiple
port
monitored ports.
Packet monitoring
directions can
inbound, outbound or
both.
Monitoring applies to
both inbound
outbound packets.
Rate limit applies to
both inbound
rate
outbound packets
with a rate value of 64
kbps.
Support
Huawei Technologies Proprietary
Related Command
port
monitor-port
mirroring-port
be
mirroring-group group-id
mirroring-port
mirroring-port-list
{ inbound | outbound }
mirroring-group group-id
reflector-port
reflector-port
and
mirroring-group group-id
{ local | remote-source |
remote-destination }
mirroring-group group-id
remote-probe
remote-probe-vlan-id
and
line-rate
unknown-multicast drop
enable
1-4
Chapter 1 QoS Configuration
Related
section
Configuring
Local Port
Monitoring
Configuring
RSPAN
vlan
Setting Rate
Limit on Ports
Configuring
Unknown
Multicast
Packet
Discarding