Huawei Quidway S3100 Series Operation Manual page 48

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
Operation
Set the
number of lines the
screen can contain
Set history command
buffer size
Set the timeout time
for the user interface
Note that the level the commands of which are available to users logging into a switch
depends on both the authentication-mode { password | scheme | none } and the
user privilege level level command, as listed in the following table.
Table 2-7 Determine the command level (B)
Authentication
mode
Local authentication
(authentication-m
ode password)
Command
maximum
screen-length
screen-length
history-command
max-size value
idle-timeout
[ seconds ]
Scenario
User type
Users logging
into the AUX
user interface
Huawei Technologies Proprietary
2-10
Chapter 2 Logging in through the Console Port
Description
Optional
By default, the screen can
contain up to 24 lines.
You can
screen-length 0 command
to disable the function to
display information in pages.
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.
Optional
The default timeout time of a
user interface is 10 minutes.
With the timeout time being
10 minutes, the connection
minutes
to a user
terminated if no operation is
performed
interface within 10 minutes.
You can
idle-timeout 0 command to
disable the timeout function.
Command
The user privilege level
level command not
e xecuted
The user privilege level
level command already
executed
use the
interface is
in the user
use the
Command
level
Level 3
Determined
by the level
argument