Table of Contents
Advertisement
Operation Manual – System Maintenance and Debugging
Quidway S3100 Series Ethernet Switches
Debugging information
Debugging information
Protocol debugging switches
Protocol debugging switches
Terminal display switches
Terminal display switches
Figure 2-1 Debugging information outpu
You can use the following commands to operate the two kinds of switches.
Perform the following operations in user view.
Table 2-10 Enable debugging and terminal display
Operation
Enable
debugging
Enable
display
debugging
ON
ON
OFF
OFF
Command
debugging
system
module-name
[ debugging-option ] }
terminal
for
terminal debugging
Huawei Technologies Proprietary
2-5
Chapter 2 Basic System Configuration
OFF
OFF
ON
ON
ON
ON
t
{
all
|
By default, all debugging is
disabled in the system.
By default, terminal display
for debugging is disabled.
Because
debugging information will
affects the efficiency of the
system, take care when you
enable
(especially when you use the
debugging all command),
and disable all debugging
after
debugging.
& Debugging
Description
the
output
of
debugging
finishing
your
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
