Operation Manual – GVRP
Quidway S3100 Series Ethernet Switches
Field
Attribute Event
Attribute Value
End Mark
1.1.3 Protocol Specifications
GVRP is defined in IEEE 802.1Q standard.
1.2 GVRP Configuration
The GVRP configuration tasks include configuring the timers, enabling GVRP, and
configuring the GVRP port registration mode.
1.2.1 Configuration Prerequisite
The port on which GVRP will be enabled must be set to a Trunk port.
1.2.2 Configuration Procedure
Table 1-2 Configuration procedure
Operation
Enter
view
Configure
LeaveAll timer
Enter
port view
Configure
Hold, Join, and
Leave timers
Description
The event described by the
attribute
The value of the attribute
End mark of the GVRP PDU.
Command
system
system-view
the
garp
timer
timer-value
Ethernet
interface
interface-number
the
garp timer { hold | join |
leave } timer-value
Huawei Technologies Proprietary
0: LeaveAll Event
1: JoinEmpty
2: JoinIn
3: LeaveEmpty
4: LeaveIn
5: Empty
The attribute value of GVRP
is the VID.
—
—
Optional
leaveall
By default, the LeaveAll timer is
set to 1,000 centiseconds.
interface-type
—
Optional
By default, the Hold, Join, and
Leave timers are set to 10, 20,
and
respectively.
1-4
Chapter 1 GVRP Configuration
Value
Description
60
centiseconds