Rmon Configuration Example - Huawei Quidway S3100 Series Operation Manual

Operation Manual – RMON
Quidway S3100 Series Ethernet Switches
Table 1-2 Display and debug RMON
Display RMON statistics
Display RMON history information
Display RMON alarm information
Display
information
Display RMON events
Display RMON event logs

1.4 RMON Configuration Example

I. Network requirements
Ensure that the SNMP agents are correctly configured before performing RMON
configuration.
The switch to be tested has a configuration terminal connected to its console port
and is connected to a remote NMS through Internet. Create an entry in the
Ethernet statistics table to make statistics on the Ethernet port performance for
network management.
II. Network diagram
Console Port Console Port
Figure 1-1 Network diagram for RMON configuration
III. Configuration procedures
# Configure RMON.
<Quidway> system-view
Operation
extended RMON
Internet Internet
Netw ork Port Netw ork Port
Sw itc Sw itc h h
Huawei Technologies Proprietary
Chapter 1 RMON Configuration
display rmon statistics [ interface-type
interface-number | unit unit-number ]
display rmon history [ interface-type
interface-number | unit unit-number ]
display rmon alarm [ entry-number ]
alarm display
[ prialarm-entry-number ]
display rmon event [ event-entry ]
display rmon eventlog [ event-entry ]
1-5
Command
rmon prialarm