Telnet Configuration With Authentication Mode Being Scheme; Configuration Procedure - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
3.4 Telnet Configuration with Authentication Mode Being
Scheme

3.4.1 Configuration Procedure

Table 3-8 Telnet configuration with the authentication mode being scheme
Operation
Enter system view
Configure
the
authentic
ation
scheme
Create a local user and
enter local user view
Set the authentication
password for the local
user
Specify the service type
for VTY users
Quit to system view
Enter one or more VTY
user interface views
Command
system-view
Enter the
default ISP
domain system
domain
view
Configure
the AAA scheme
scheme to radius-scheme
be applied radius-scheme-name
to the [ local ] | none }
domain
Quit to
system quit
view
local-user user-name
password { simple |
cipher } password
service-type
[ level level ]
quit
user-interface
first-number
[ last-number ]
Huawei Technologies Proprietary
3-10
Chapter 3 Logging in through Telnet
—
Optional
By default, the local AAA
scheme is applied. If you
specify to apply the local AAA
scheme, you need to perform
the configuration concerning
{ local |
local user as well.
If you specify to apply an
existing scheme by providing
the
argument,
perform
configuration as well:
Perform
configuration
switch.
AAA&RADIUS module for
more.)
Configure the user name
and password accordingly
on the AAA server. (Refer
to the user manual of AAA
server.)
No local user exists by
default.
Required
telnet
Required
—
vty
—
Description
radius-scheme-name
you need to
the following
AAA&RADIUS
on the
(Refer to the