Huawei Quidway S3100 Series Operation Manual page 336

Operation Manual – IGMP Snooping
Quidway S3100 Series Ethernet Switches
Operation
Specify the VLANs
to be allowed to
pass through the
Ethernet
Table 1-9 Configure multicast VLAN on Layer 2 switch
Operation
Enter system view
Enable
Snooping globally
Enter VLAN view
Enable
Snooping on the
VLAN
Enable
VLAN
Exit the VLAN view
Enter the view of
the Ethernet port
connected to the
Layer 3 switch
Define the port as a
trunk or hybrid port
Specify the VLANs
to be allowed to
pass through the
Ethernet
Enter the view of
the Ethernet port
connected to a user
device
Exit the
view
Define the port as a
hybrid port
Specify the VLANs
to be allowed to
pass the port
Command
port hybrid vlan vlan-id-list
{ tagged | untagged }
port trunk pvid vlan vlan-id
Command
system-view
IGMP
igmp-snooping enable
vlan vlan-id
IGMP
igmp-snooping enable
multicast
service-type multicast
quit
interface
interface-number
port link-type { trunk |
hybrid }
port hybrid vlan vlan-id-list
{ tagged | untagged }
port trunk pvid vlan vlan-id
interface
interface-number
current
quit
port link-type hybrid
port hybrid vlan vlan-id-list
{ tagged | untagged }
Huawei Technologies Proprietary
Chapter 1 IGMP Snooping Configuration
Required
The multicast VLAN defined
on the Layer 2 switch must be
included and set as tagged.
—
Required
vlan-id is a VLAN ID.
Required
Required
—
interface-type
—
—
The multicast VLAN must be
included and set as tagged.
interface-type interface-num
interface-type
are the interface type and
interface number.
—
Required
Required
The multicast VLAN must be
included and set as untagged.
1-9
Description
Description