Chapter 5 Logging In Through Web-Based Network Management System - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
# Configure the IP address of the management VLAN interface to be 10.153.17.82.
[Quidway-VLAN-interface1] ip address 10.153.17.82 255.255.255.0
Step 2: Configure the user name and the password for the Web-based network
management system.
Add a Telnet user account for the switch, setting the user level to level 3 (the
administration level).
# Configure the user name to be admin.
[Quidway] local-user admin
# Set the user level to level 3.
[Quidway-luser-admin] service-type telnet level 3
# Set the password to admin.
[Quidway-luser-admin] password simple admin
Configure a static route from the switch to the gateway.
[Quidway] ip route-static 0.0.0.0 255.255.255.255
Step 3: Establish an HTTP connection between your PC and the switch, as shown in
the following figure.
Sw itch Sw itch Sw itch Sw itch
PC PC PC PC
PC PC PC PC
Figure 5-3 Establish an HTTP connection between your PC and the switch
Step 4: Log into the switch through IE. Launch IE on the Web-based network
management terminal (your PC) and enter the IP address of the management VLAN
interface of the switch (here it is http://10.153.17.82). (Make sure the route between the
Web-based network management terminal and the switch is available.)
Chapter 5 Logging in through Web-based Network
HTTP Connection HTTP connection HTTP Connection HTTP Connection HTTP connection HTTP Connection HTTP Connection HTTP Connection
Huawei Technologies Proprietary
5-3
Management System