Huawei Quidway S3100 Series Operation Manual page 457

Operation Manual – FTP and TFTP
Quidway S3100 Series Ethernet Switches
Download the application named switch.bin from the PC to the switch and upload the
configuration file named vrpcfg.cfg to the directory named Switch on the PC to backup
the configuration file.
II. Network diagram
Switch Switch Switch
Figure 1-5 Network diagram for TFTP configuratio
III. Configuration procedure
1) Start the TFTP server and configure the work directory on the PC.
2) Configure the switch.
# Log into the switch. (You can log into a switch through the Console port or by
Telneting to the switch. See Chapter 2 "Log into an Ethernet Switch" for detailed
information.)
<Quidway>
Caution:
If the free space of the Flash of the switch is insufficient to hold the file to be
downloaded, you need to delete useless files in the flash to make room for the file.
# Enter system view
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway]
# Configure the IP address of a VLAN interface on the switch to be 1.1.1.1, and ensure
that the port through which the switch connects with the PC belongs to this VLAN. (This
example assumes that the port belongs to VLAN 1.)
[Quidway] interface vlan 1
[Quidway-vlan-interface1] ip address 1.1.1.1 255.255.255.0
[Quidway-vlan-interface1] quit
# Download the application named switch.bin from the TFTP server to the switch.
<Quidway> tftp 1.1.1.2 get switch.bin switch.bin
Network Network
Huawei Technologies Proprietary
1-12
Chapter 1 FTP and TFTP Configuration
PC PC
n