Sftp Server Configuration - Huawei Quidway S3100 Series Operation Manual

Operation Manual – SSH2.0
Quidway S3100 Series Ethernet Switches

1.2.2 SFTP Server Configuration

The following sections describe SFTP server configuration tasks:
Configuring service type for an SSH user
Enabling the SFTP server
Setting connection timeout time
I. Configuring service type for an SSH user
Table 1-9 Configure service type for an SSH user
Operation
Enter system view
Configure service type
for an SSH user
II. Enabling the SFTP server
Table 1-10 Enable the SFTP server
Operation
Enter system view
Enable the SFTP server
III. Setting connection timeout time
After you set the timeout time for the SFTP user connection, the system will
automatically release the connection when the time is up.
Table 1-11 Set connection timeout time
Enter system view
Set timeout time for the SFTP
user connection
system-view
ssh
service-type { telnet |
sftp | all }
system-view
sftp server enable
Operation
Huawei Technologies Proprietary
Chapter 1 SSH Terminal Services
Command
—
Optional
user username
By default, the SSH service
type is telnet.
Command
—
Required
By default, the SFTP server
is not enabled.
Command
system-view
sftp timeout
timeout-value
1-13
Remarks
Remarks
Remarks
—
Required
By default, the
connection timeout time
is 10 minutes.