Configuration Example - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
Table 2-9 Determine the command level
Authentication
mode
authentication-
mode scheme

2.6.2 Configuration Example

I. Network requirements
Assume that you are a level 3 VTY user and want to perform the following configuration
for users logging in through the Console port:
Configure the name of the local user to be "guest".
Set the authentication password of the local user to 123456 (in plain text).
Set the service type of the local user to Terminal.
Configure to authenticate users logging in through the Console port in the scheme
mode.
The commands of level 2 are available to users logging into the AUX user
interface.
The baud rate of the Console port is 19,200 bps.
The screen can contain up to 30 lines.
The history command buffer can store up to 20 commands.
Chapter 2 Logging in through the Console Port
Scenario
User type
The user privilege level level
command is not executed, and
the service-type
[ level level ] command does
not specify
command level.
The user privilege level level
command is not executed, and
Users
the service-type
logging into
[ level
the Console
specifies
port and
co mmand level.
pass
The user privilege level level
AAA&RADI
command is executed, and the
US or local
service-type terminal [ level
authenticati
level ] command does not
on
specify the available command
level.
The user privilege level level
command is executed, and the
service-type terminal [ level
level ] command specifies the
available command level.
Huawei Technologies Proprietary
2-15
Command
terminal
the available
terminal
level ] command
the available
Command
level
Level 0
Determined
by the
service-type
terminal
[ level level ]
command
Level 0
Determined
by the
service-type
terminal
[ level level ]
command