Huawei Quidway S3100 Series Operation Manual page 51

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
Operation
Create a local user
(Enter local user view.)
Set the authentication
password for the local
user
Specify
type for AUX users
Quit to system view
Enter
interface view
Configure
authenticate
locally or remotely
Configure
the
Console
port
Configure
command
available
logging into the user
interface
Make terminal services
available to the user
interface
Command
local-user user-name
password { simple |
cipher } password
the service service-type terminal
[ level level ]
quit
AUX user
user-interface aux 0
to
authentication-mode
users
scheme
Set the
speed speed-value
baud rate
Set the
parity { even | none |
check
odd }
mode
Set the
stopbits { 1 | 1.5 | 2 }
stop bits
Set the
databits { 7 | 8 }
data bits
the
level
user privilege level
to users
level
shell
Huawei Technologies Proprietary
Chapter 2 Logging in through the Console Port
Required
No local user exists by default.
Required
Required
—
—
Required
The specified AAA scheme
determines
authenticate users locally or
remotely.
Users are authenticated locally
by default.
Optional
The default baud rate of the
AUX port (also the Console port)
is 9,600 bps.
Optional
By default, the check mode of a
Console port is set to none, that
is, no check bit.
Optional
The default stop bits of a
Console port is 1.
Optional
The default data bits of a
Console port is 8.
Optional
By default, commands of level 3
are available to users logging
into the AUX user interface.
Optional
By default, terminal services are
available in all user interfaces.
2-13
Description
whether to