Configuration Procedure On The Source Switch - Huawei Quidway S3100 Series Operation Manual

Operation Manual – QoS
Quidway S3100 Series Ethernet Switches

1.9.2 Configuration Procedure on the Source Switch

Table 1-17 Configuration procedure on the source switch
Operation
Enter system view
Create
Remote-probe
VLAN and enter
the VLAN view
Define the current
VLAN
Remote-probe
VLAN
Exit the
view
Enter Ethernet port
view of the Trunk
port
Configure to permit
Remote-probe
VLAN packets to
pass through the
Trunk port
Exit the
view
Configure
remote
mirroring group
Configure
remote
monitoring port
Configure
remote
port
Command
system-view
the
vlan vlan-id
as the
remote-probe vlan enable
current
quit
interface
interface-number
port trunk permit
remote-probe-vlan-id
current
quit
the
mirroring-group
source
remote-source
mirroring-group
the
mirroring-port
source
mirroring-port-list { inbound
| outbound }
the
mirroring-group
reflector
reflector-port reflector-port
Huawei Technologies Proprietary
—
The
represents the ID of the
Remote-probe VLAN.
Required
—
interface-type
—
vlan
Required
—
group-id
Required
group-id
Required
Required
Do not enable STP on the
remote monitoring reflector
port,
Access port.
group-id
After
configured as a reflector port,
users cannot modify its port
type or default VLAN ID,
neither
VLANs.
1-16
Chapter 1 QoS Configuration
Description
parameter vlan-id
which must be
a port has been
add it the other
an