Telnet Configuration With Authentication Mode Being None; Configuration Procedure - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
Authentication
mode
Scheme
3.2 Telnet Configuration with Authentication Mode Being
None

3.2.1 Configuration Procedure

Table 3-4 Telnet configuration with the authentication mode being none
Operation
Enter system view
Enter one or more
VTY user interface
views
Configure not to
authenticate users
logging into VTY
user interfaces
Telnet configuration
AAA configuration
Specify to
specifies whether
perform local
to perform local
authentication
authentication
or RADIUS
RADIUS
authentication
authentication
Configure
Configure
names
user name
passwords
and password
local/remote users
Manage VTY Set service type
users for VTY users
Perform Perform common
common Telnet
configuration configuration
Command
system-view
user-interface
first-number [ last-number ]
authentication-mode none
Huawei Technologies Proprietary
3-3
Chapter 3 Logging in through Telnet
Description
Optional
Local authentication
performed by default.
or
Refer
AAA&RADIUS module for
more.
Required
The user name and
password of a local
user are configured on
user
the switch.
and
The user name and
for
password of a remote
user are configured on
the DADIUS server.
Refer to user manual of
RADIUS
more.
Required
Optional
Refer to Table 3-2.
Description
—
vty
—
Required
By default, VTY users are
authenticated after logging in.
is
to the
server for