Displaying Operating Information About Modules In System - Huawei Quidway S3100 Series Operation Manual

Operation Manual – System Maintenance and Debugging
Quidway S3100 Series Ethernet Switches

2.3.2 Displaying Operating Information about Modules in System

When your Ethernet switch is in trouble, you may need to view a lot of operating
information to locate the problem. Each functional module has its own operating
information display command(s). You can use the command here to display the current
operating information about the modules (settled when this command is designed) in
the system for troubleshooting your system.
Perform the following operation in any view.
Table 2-11 Display the current operation information about the modules in the system.
Operation
Display the current
operation
information
the modules in the
system.
Command
about display diagnostic-information
Huawei Technologies Proprietary
2-6
Chapter 2 Basic System Configuration
Description
You can execute this
command twice and
find the difference
between
executing results to
locate the problem.
& Debugging
the two