Enabling The Cluster Function - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Stack&Cluster
Quidway S3100 Series Ethernet Switches
Operation
Configure
range
information within
which
collected
Configure the hop
delay to forward
topology-collection
request packets
Configure the port
delay to forward
topology collection
request packets
Configure
interval to collect
topology
information
Quit system view.
Start
information
collection
Note:
By default, an S3100 series switch operating as a candidate switch joins a cluster
automatically. You can disable the switch from operating in this way by setting the ntdp
timer to 0.

2.2.5 Enabling the Cluster Function

Table 2-6 Enable the cluster function
Operation
Enter system view
Enable the cluster
function globally
the
topology
ntdp hop hop-value
is to be
ntdp timer hop-delay time
ntdp timer port-delay time
the
ntdp
interval-in-minutes
Quit
topology
ntdp explore
system-view
cluster enable
Huawei Technologies Proprietary
Command
timer
Command
2-7
Chapter 2 Cluster
Description
Optional
The hop-value argument is
the range measured in hop
count.
Optional
The time argument is the
delay time.
Optional
The time argument is the
delay time.
Optional
The interval-in-minutes
argument is the
interval.
—
Optional
Description
—
Required
desired