Huawei Quidway S3100 Series Operation Manual page 175

Operation Manual – MSTP
Quidway S3100 Series Ethernet Switches
I. Configuration procedure (in system view)
Table 1-12 Configure the maximum transmitting speed for specified ports in system
view
Operation
Enter system view
Configure
maximum
transmitting speed
for specified ports
II. Configuration procedure (in Ethernet port view)
Table 1-13 Configure the maximum transmitting speed in Ethernet port view
Operation
Enter system view
Enter Ethernet port
view
Configure
maximum
transmitting speed
As the maximum transmitting speed parameter determines the number of the
configuration BPDUs transmitted in each Hello time, set it to a proper value to avoid
MSTP from occupying too many network resources. The default is recommended.
III. Configuration example
# Set the maximum transmitting speed of Ethernet1/0/1 port to 5.
Configure the maximum transmitting speed in system view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] stp interface ethernet1/0/1 transmit-limit 5
Configure the maximum transmitting speed in Ethernet port view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet1/0/1
[Quidway-Ethernet1/0/1] stp transmit-l
Command
system-view
the
stp interface interface-list
transmit-limit packetnum
Command
system-view
interface interface-type
interface-number
the
stp transmit-limit
packetnum
Huawei Technologies Proprietary
1-19
Chapter 1 MSTP Configuration
Description
—
Required
The maximum transmitting
speed of all Ethernet ports on
a switch defaults to 3.
Description
—
—
Required
The maximum transmitting
speed of all Ethernet ports on
a switch defaults to 3.